3. Removing the Touch Panel1) Remove the six mounting screwsq, and remove the center supportplate w.2) Remove the three flat cables e(J912, J913, J916) on the controlpanel CPU PCB, and disconnect theconnector r (J956) of the inverterPCB.3) Remove the five mounting screwst, and remove the touch panel y.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-24 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-424qq qwFigure 7-425er tty
