L. Lifter Drive Assembly1. Construction2. Removing1) Open the front door, and slide outthe holding tray assembly 10 cmfrom the copier.2) Remove the rear cover.3) Remove the waste toner bottle.4) Remove the rear right grip assem-bly.5) Remove the three mounting screwsq, and remove the waste toner bot-tle support plate w.6) Disconnect the connector e, andremove the three screws r; then,remove the lifter drive assembly t.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-40 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-460qqwFigure 7-459Figure 7-461ert
