9. Positioning the Pick-Up RollerReleasing Solenoid of the CassetteAs shown in Figure 5-846, adjust theposition of the solenoid so that thedistance from the bottom of the pick-upassembly and the section A of the rollerarm is 36 ±0.5 mm. (Use two screwsq.)10. Adjusting the Registration for theCassetteLoosen the screw w shown inFigure 5-847 using a screwdriver e,and adjust the position of the cassettehook plate q so that the registration isas specified.In the case of cassette 4, be sure toenter the paper width basic value (*4*)after making the adjustment.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-83COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-84636±0.5mmAqFigure 5-847Figure 5-848024681010±1.5mmeqqw
