4. Removing the Deck FeedingRoller1) Remove the deck pick-up unit. (Seep. 8-40.)2) Open the deck vertical pathassembly, and turn over the deckpick-up unit.3) Remove the resin ring q, andremove the deck feeding roller wand the drive belt e toward thefront.5. Orientation of the Deck FeedingRollerWhen installing the deck feedingroller q, make sure that the belt pulleyw is toward the front. When installingthe feeding roller rubber to the feedingroller shaft, make sure that the marking“5” e faces the rear.CHAPTER 8 PAPER DECK-A18-42 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)qw ew q (front)e55Figure 8-454Figure 8-455
