D. Left Deck Pick-Up Assembly1. Removing the Pick-Up Assemblyfrom the Copier1) Remove the left/right paper deck.2) Slide out the holding tray feedingassembly about 10 cm to the front.3) Disconnect the two connectors q,and remove the mounting screws wfrom the two positioning pins; then,remove the positioning pins e, andremove the left deck pick-up assem-bly r.When installing the left deck pick-up assembly, slide out the holdingtray feeding assembly slightly tothe front.Pay attention to the engagement ofthe gear.2. Removing the Pick-Up Roller1) Remove the left deck pick-upassembly from the copier.2) Remove the two stop rings q fromthe front and the rear; then, removethe two pick-up rollers w.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-84 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-849qwweerFigure 5-850q qwNote:
