3) Disconnect the connector e, andslide out the developing assemblyr from the copier.2. Removing the Blade Unit1) Remove the developing assemblyfrom the copier.2) Remove the two mounting screwsq, and remove the developingassembly cover w.3) Place a newspaper on the floor or adesk, and empty the developingassembly of toner.4) Remove the two mounting screwse, and remove the blade unit rtogether with the mounting plate.The blade must be installed to avery high precision. Do not removeit on its own in the field. (You mustremove its mounting plate.)CHAPTER 4 IMAGE FORMATION SYSTEM4-58 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 4-337q qwFigure 4-338e erFigure 4-336e rCaution:
