12. Removing the Lower SeparationClaw Assembly1) Slide out the fixing unit from thecopier.2) Remove the fixing/feeding assemblyfront cover.3) Remove the brake unit.4) Remove the fixing assembly uppercover.5) Remove the fixing cleaning belt,clean the silicone oil pan; then,remove the fixing assembly upperunit.6) Remove the two mounting screwsq, and remove the lower separationclaw assembly 2 together with itssupport plate w.7) Remove the tension spring, andremove the lower separation clawassembly.13. Removing the Lower Roller1) Slide out the fixing/feeding unit fromthe copier.2) Remove the fixing/feeding assemblyfront cover.3) Remove the flywheel.4) Remove the fixing assembly uppercover and the fixing cleaning belt;then, remove the silicone oil pan.5) Remove the upper roller assemblyof the fixing assembly.6) Remove the lower separation clawsupport plate.7) Remove the lower roller q from thefixing assembly, remove the two E-rings w from the lower roller, andremove the two bearings e.CHAPTER 6 FIXING SYSTEM6-29COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 6-225qqwFigure 6-226q ww e e
