J. Charging Wire1. OutlineThe photosensitive drum is sur-rounded by three charging wires: prima-ry, pre-transfer, transfer/separation,each of which is 0.06 mm in diameter.2. Removing the Wire Cleaner of thePrimary Charging Assembly1) Pick the wire cleaner with fingers,and disengage the hook with ascrewdriver.3. Stringing the Charging WiresAs a rule, with the exception of thegrid wire, all charging wires are strung inthe same way; here, the chargingassembly is used to show the steps.1) Remove the shielding plate (left,right) of the charging assembly. Toprevent deformation (slack) of thecharging assembly, be sure toremove the left and the right shield-ing plates individually (i.e., do notloosen the mounting screws q ofboth plates at the same time).2) Remove the wire cleaner.CHAPTER 4 IMAGE FORMATION SYSTEM4-51COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 4-323Figure 4-324q
