10. Adjusting the Position of the Pick-Up Roller Releasing Solenoid (multifeeder)Slide the solenoid in the direction of A so that the gap between the shutter q andthe shutter plate w is 0.4 ±0.2 mm when the solenoid is pulled.Figure 11-234Figure 11-234aq w0.4±0.2mm0.4±0.2mmACHAPTER 11 TROUBLESHOOTING11-31COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
