6. Cleaning the Cleaner Side ScraperPerform the following steps whenever you have replaced the cleaning blade (every500,000 copies).1) Remove the cleaning blade.2) Remove the paper lint collecting at the tip of the side scraper (gap A betweenmagnet roller and toner guide roller) with tweezers.3) Remove the toner coated on the surface of the magnet roller. (Shape copy paper intothe letter U, and scoop up the toner.)Figure 11-224 (rear)Figure 11-224a (front)Toner guide roller4~8mmSide scraper (front)Magnet rollerRemove waste toner collecting here.(front)30~40mmAToner guide roller4~8mmSide scraper (rear)Magnet rollerRemove waste toner collecting here.(rear)30~40mmACHAPTER 11 TROUBLESHOOTING11-21COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
