6. Removing the Feeding Fan1) Remove the rear cover.2) Remove the three mounting screws,and shift the high-voltage trans-former PCB.3) Remove the cleaner fan.4) Remove the two mounting screwsq, and disconnect the connector w;then, remove the feeding fan e.7. Removing the Scanner MotorCooling Fan1) Removing the rear cover.2) Removing the two mounting screwsq, and disconnect the connector w;then remove the scanner motercooling fan e.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-31COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-437qweFigure 7-438qwe
