5. Removing the Re-Pick Up Roller1) Open the front cover.2) Slide out the holding tray assemblyto the front.3) Remove the mounting screw q (1each), and remove the two pick-uprollers w.6. Removing the Holding Tray DriverPCB1) Open the front cover.2) Slide the holding tray assembly tothe front and out of the copier.3) Turn over the holding tray assembly.4) Remove the two mounting screwsq, and remove the holding tray dri-ver PCB cover w.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-97COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-877qwwFigure 5-878qw
