2. Removing the Holding Tray fromthe Copier1) Open the front cover.2) Remove the fixing/feeding frontcover.3) Slide the holding tray assembly tothe front and out of the copier.3. Removing the Holding Tray Re-Pick Up Assembly1) Slide the holding tray assembly tothe front and out of the copier.2) Remove the screw e (1 each), andremove the inlet assembly frontupper cover q and the inlet assem-bly rear cover w; then, remove thetwo screws t and disconnect thetwo connectors y to remove thesided guide plate r.3) Remove the three mounting screwsu (front).CHAPTER 5 PICK-UP/FEEDING SYSTEM5-95COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-873q wertyFigure 5-874 (front)uu
