CHAPTER 3 EXPOSURE SYSTEM3-24 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)A. Scanner Drive Assembly1. Removing the Scanner DriveMotor1) Remove the RDF/copyboard cover.2) Remove the machine’s rear cover.3) Remove the three mounting screwseach, and remove the RDF/copy-board cover.The mounting screws used on theRDF/copyboard cover are longerthan others.4) Remove the rear upper cover.5) Remove the rear right cover.6) Remove the multifeeder assembly.7) Remove the three mounting screwsq, and disconnect the five connec-tors w; then, remove the RDF rearright mount e.8) Remove the mounting screw r,and remove the RDF/copyboardcover detection assembly t.Caution:Figure 3-501Figure 3-502Figure 3-50345212213
