K. Developing AssemblyThe machine’s developing assem-bly is not equipped with a develop-ing cylinder protection cover,requiring you to take care whenev-er you have removed the develop-ing assembly.If the developing assembly is notset inside the copier, be sure not toinstall the developing assemblylocking assembly. Otherwise, thetoner collecting in the path throughwhich toner is fed from the hopperto the developing assembly canstart to pour out because of thevibrations caused byinspection/repair work.1. Removing the DevelopingAssembly from the Copier1) Open the multifeeder door; then,remove the mounting screw, andremove the door stopper tape.2) Remove the mounting screw q, andpush the developing assembly lock-ing assembly w in the direction ofthe arrow to remove.CHAPTER 4 IMAGE FORMATION SYSTEM4-57COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Caution:Figure 4-335wq
