C. Right Deck Pick-Up Assembly(cassette holder)1. Removing the Pick-Up Assemblyfrom the Copier1) Slide out the paper deck and thecassette of the pick-up assemblywhich you want to remove from thecopier.2) Open the upper right door and thelower right door.The pick-up assembly cannot beremoved if you try to remove itwithout first removing the paperdeck and the cassette because ofthe lifter.3) Remove the mounting screw q, andremove the connector cover w;then, disconnect the two connectorse.4) Remove the two mounting screwsr, and remove the pick-up assem-bly t.2. Removing the Pick-Up Roller1) Remove the pick-up assembly.2) Remove the two stop rings q on theoutside, and remove the pick-uproller w in the direction of the arrow.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-77COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-835q werrtFigure 5-836qwCaution:
