4. Adjusting the Left/Right Registration (holding tray position; 2nd side of two-sided/overlay copies)Loosen the two screws, and move the guide plate of the holding tray assembly sothat the distance between the line in the copy image and the edge of the copy paper is10 ±2.0 mm in Direct.Figure 11-2065. Adjusting the Left/Right MarginMake adjustments so that the image left/right margin is 2.75 ±2.5 mm when the TestSheet is copied in Direct.Be sure to adjust the left/right registration before making this adjustment.a. Front Margin Adjustment (left margin)Select ‘F-BLANK’ in service mode ( ), and change the setting. Increasing thesetting increases the front margin.(unit: 0.1 mm)b. Adjusting the Rear Margin (right margin)Select ‘R-BLANK’ in service mode ( ), and change the setting. Increasing thesetting increases the rear margin.(unit: 0.1 mm)]3]]3]10±2.0mm0246810CHAPTER 11 TROUBLESHOOTING11-8 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
