3. Removing the Fixing HeatExhaust Fan1) Remove the rear cover.2) Remove the three mounting screwsq, and disconnect the connector w;then, remove the fixing heat exhaustfan e.4. Removing the Developing Fan1) Remove the rear cover.2) Disconnect the connector (J301) qof the high-voltage transferor PCB;then, remove the three mountingscrews w, and shift the high-voltagetransformer assembly e.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-29COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-434qweFigure 7-433qqwe
