13. Adjusting the Pressure of theSeparation Roller of the HoldingtrayTurn the separation roller adjusting rollso that the distance to the shaft is 32.7±0.1 mm.14. Positioning the Holding TrayPaper Deflecting Plate DriveSolenoidInstall the solenoid so that its stroke(distance between rubber silencer andsolenoid edge) is 5.0 ±0.3 mm.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-104 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-89232.7±0.1mmFigure 5-8935.0±0.3mm
