3. Removing the Feeding Roller1) Remove the pick-up assembly fromthe copier.2) Remove the screw w, and removethe feeding roller cover q.3) Remove the stop ring e from thefront of the feeding roller.4) Remove the stop ring r and thepick-up roller t at the front; then,remove the feeding roller u togeth-er with the timing belt y.4. Removing the Separation Roller1) Remove the two mounting screwsq, and remove the feeding guideplate w; then, remove theopen/close guide e.2) Remove the two mounting screwsr, and detach the separation rollerassembly t from the joint.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-79COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-838qwer t yuFigure 5-839qweFigure 5-840rt
