E. Removing the Counter Assembly1) Open the front door, and remove theinside upper cover; then, removethe mounting screws from the con-trol panel.2) Remove the mounting screw q,and disconnect the two connectorsw; then, remove the counterassembly e together with the sup-port plate.F. Main Motor Assembly1. Removing the Main Motor1) Remove the rear cover.2) Remove the high-voltage PCB.3) Remove the spring q, and loosenthe tension pulley; then, remove thefour mounting screws w, detach thebelt from the end of the main motor,and remove the main motor e.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-32 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-439qwweFigure 7-440q w e
