7. Removing the Internal DeliveryAssembly Roller1) Open the front door, and slide thefixing/feeding unit to the front andout of the copier.2) Remove the fixing/feeding assemblyfront cover.3) Remove the fixing assembly upperunit. (See p. 6-22.)4) Remove the fixing assembly lowerseparation claw assembly. (See p.6-31.)5) Remove the E-ring q, gear w, andparallel pin e at the front.6) Remove the E-ring r and thebushing t.7) Remove the E-ring y and the gearu at the rear.8) Remove the E-ring i and thebushing o.9) Remove the fixing assembly outletpaper sensor assembly. (See p. 6-39.)10) Remove the internal delivery roller.CHAPTER 6 FIXING SYSTEM6-36 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 6-240y ui oFigure 6-239qwer t
