5. Orientation of the Feeding RollerAssembly of the Left Deck Pick-Up AssemblyWhen orienting the feeding rollerassembly q to the left pick-up assem-bly, make sure that the belt pulley w istoward the front.When installing the feeding roller eto the feeding roller shaft r, make surethat the marking “5” faces the front.E. Pick-Up Vertical Path RollerAssembly1. Removing the Pick-Up VerticalPath Roller Assembly1) Open the upper right door and thelower right door.2) Remove the right deck pick-upassembly/cassette pick-up assem-bly.3) Remove the two mounting screwsq, and disconnect the connector;then, remove the pick-up verticalpath roller assembly w.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-87COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)q Feeding roller assemblyw Belt pulleye Feeding rollerr Feeding roller shaftt Marking (roller)Figure 5-855w qr55et(front)Figure 5-856q qw
