7) Remove the three mounting screws!1, and remove the inside uppercover !2; then, slide in thefixing/feeding assembly.8) Remove the three mounting screws!3; then, remove the control panel,and turn it over.Take care not to damage the sur-face of the control panel by thechassis of the copier.9) Disconnect the three connectors(J911, J915, J955).2. Removing the Control Panel PCB1) Remove the four mounting screwsq, and shift the back cover w to theright to remove.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-23COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-421!2!1Figure 7-422!3Caution:Figure 7-423q w
