5. Cleaning the Mirror (No. 5 mirror)1) Remove the copyboard glass.2) Remove the lens hood.3) Remove the mirror guide plate.4) Move the lens stage in the direction of Enlarge.5) Remove the screw, and remove the mirror cleaning tool.6) While butting the mirror cleaning tool q against the No. 5 mirror as shown, clean themirror by moving the tool in the direction of the arrow.At this time, be sure that your finger or the cleaning tool will not touch the No. 4mirror.Figure 11-2136. Routing the Light-Blocking Beltq Light-blocking belt 1 e Light-blocking belt 3w Light-blocking belt 2 r Light-blocking belt 4Figure 11-214qwerqCHAPTER 11 TROUBLESHOOTING11-14 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
