A. Multifeeder Assembly1. Removing the Multifeeder Assembly1) Remove the right cover and theupper right cover, and disconnectthe two connectors q.2) Open the multifeeder assembly, andpull on the grip to open the multi-feeder door. Remove the door tape,and lift the multifeeder assembly todetach it from the hinge.2. Removing the Pick-Up Roller1) Open the multifeeder paper guide.2) Remove the two stop rings q each(left, right), two shutters each w,and two rollers e each.If you used the multifeeder (manu-al feeding) during machine installa-tion or after a long period of notusing it, pick-up may fail. If such isthe case, peel the protection sheetfrom the sponge roller, and drywipe the surface of the spongeroller.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-61COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-801qFigure 5-802qqwweCaution:
