7. Orientation of the Feeding Rollerof the Cassette/Deck Pick-UpAssemblyWhen installing the feeding rollerassembly q to the cassette/deck pick-up assembly, make sure that the beltpulley w is toward the front of the copi-er.When installing the feeding roller eto the feeding roller shaft r, make surethat the marking “5” t faces the front ofthe copier.8. Positioning the Pick-Up RollerReleasing Solenoid of the DeckAs shown in Figure 5-845, adjustthe position of the solenoid so that theleft end of the right solenoid arm 2 is57.2 ±0.5 mm from the center of thehole A in the solenoid mount.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-82 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)q Feeding roller assemblyw Belt pulleye Feeding rollerr Feeding roller shaftt Marking (roller)Figure 5-844w qr55et(front)Figure 5-845A57.2±0.5mm
