Q. High-Voltage TransformerAssembly1. Removing the High-VoltageTransformer Assembly1) Remove the rear cover.2) Disconnect the four connectors q(J201, J202, J203, J301).3) Remove the three mounting screwsw, and remove the PCB assemblye.4) Remove the two fastons r, and dis-connect the connector t; then,remove the two mounting screws y,and remove the transformer assem-bly u.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-46 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-470rtyy yuFigure 7-469wwqe
