C. Making Overlay Copies (2nd side)1. OutlineThe feeding path for copying on the second side of an overlay copy is formed whenthe holding tray paper deflecting plate is shifted up by the holding tray paper deflectingplate solenoid (SL8).When copying on the second side, pick-up occurs on the holding tray. The bottom-most sheet is picked up and sent to the holding tray inlet; then, the copy paper isswitched back, and forwarded to the holding tray registration roller.Figure 5-605CL5CL4SL6M2Holding trayre-pick up rollerCL6SL8PS14PS17Holding trayinlet rollerFeeding rollerHolding tray registration rollerHolding trayreversingregistration rollerJ113-A5J113-B8J113-A7J113-A6J113-A3J113-B9J113-B11Holding tray pick-up detection signal (PS17D)Holding tray paper deflecting plate solenoid drive command (HTPDD)Holding tray registration paper detection signal (PS14D)Holding tray reversing clutch drive command (HTRVCD)Holding tray forward clutch drive command (HTFWCD)Holding tray separation clutch drive command (HTSPCD)Holding tray re-pick up roller solenoid drive command (HTDSD)DC controller PCBPick-up motorCHAPTER 5 PICK-UP/FEEDING SYSTEM5-28 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
