CHAPTER 8 PAPER DECK-A18-31COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)4. Adjusting the Deck RegistrationIf the left/right registration (standard,0 ±1.5 mm) must be adjusted, performthe following:1) Draw out the compartment, and fixthe latch plate q of the deckopening solenoid (SL102) using thetwo screws w. (At this time, refer toline e on the latch plate.)5. Positioning the RollIf the compartment cannot beopened/closed smoothly, requiringadjustment of the roller position,perform the following:1) Remove the front cover. (See p. 8-20.)2) Slide out the compartment fully, andadjust the four mounting screws ron the roll support plate e so thatthe roll q is about 3 mm from thefloor w.(rear left of compartment)q weFigure 8-3603 m (approx.)q werFigure 8-361
