J. Pick-Up Drive Assembly1. Construction2. Removing1) Open the front door, and slide outthe process unit, fixing/feeding unit,and holding tray assembly about 10cm from the copier.2) Remove the rear cover.3) Remove the high-voltage trans-former PCB and the high-voltagetransformer assembly.4) Remove the waste toner bottle.5) Remove the vertical path feedingassembly.6) Remove the cleaner fan, feedingfan, and developing fan.7) Remove the fixing/waste toner driveassembly.8) Free the harness guide 1. (SeeFigure 7-447.)9) Detach the timing belt.10) Remove the two mounting screwsq, and remove the deck relay driveassembly w.11) Remove the seven mounting screwse, then, remove the pick-up driveassembly r.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-38 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-454Figure 7-455Figure 7-456eereeeqw
