5) Remove the two mounting screws,and disconnect the nine connectorsr (J201, J202, J203, J204, J205,J207, J208, J209, J210); then,remove the holding try drier PCB t.7. Removing the Holding Tray YMotor1) Slide the holding tray to the frontand out of the copier.2) Turn over the holding tray assembly.3) Remove the two mounting screwsq, and remove the right rail w.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-98 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-880qqwFigure 5-879er t
