9-1Adjusting the Position of the Pick-Up Roller Releasing Solenoid (front paperdeck)Adjust the position of the solenoid so that the left edge of the right solenoid arm 2 is57.2 ±0.5 mm from the center of the solenoid mount as shown in Figure 11-233a.Figure 11-233a9-2 Adjusting the Position of the Pick-Up Roller Releasing Solenoid (paper deck-A1)Before removing the deck pick-up roller releasing solenoid q from the support plate,remember the position of the two fixing screws w on the solenoid with reference to thescale on the support plate. Or, mark the position of the solenoid on the support plate witha scribe.If you are installing the solenoid on its own, be sure to fix it in its initial position.Figure 11-233bqwA57.2±0.5mmCHAPTER 11 TROUBLESHOOTING11-30 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
