II. STANDARDS/ADJUSTMENTSA. Image Adjustment1. Adjusting the Image Leading Edge MarginSelect ‘LE_BLANK’ in service mode ( ).Make adjustments so that the image leading edge margin is 4.5 ±1.5 mm when theTest Sheet is copied in Direct.(unit: 0.1 mm)Figure 11-2012. Adjusting the Image Leading Edge Non-Image Width (registration)Select ‘REGIST’ in service mode ( ).Make adjustments so that the image leading edge non-image width is 4.5 ±1.5 mmwhen the Test Sheet is copied in Direct.(unit: 0.1 mm)Figure 11-2024.5±1.5mm]3]4.5±1.5mm]3]CHAPTER 11 TROUBLESHOOTING11-5COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
