3. Basic Sequence of Operations in Page Separation ModeWhen making copies in page separation mode, the original on the left on thecopyboard is copied (SCFW1) and then the original on the right (SCFW2).If the copy count is ‘2’ or higher, the original on the left on the copyboard is copiedfor as many copies as specified, and then the original on the right for as many copies.In page separation mode, the copier’s AE mode (if ON) is used. The density of theoriginal in such a case is over a distance 120 mm from the leading edge of the original;the originals on both left and right sides on the copyboard are copied based on theresulting measurements.Reference:If the conditions for potential control given on p. 4-1 are met, potential controlrotation (CNTR1, 2) is executed after INTR.Figure 2-105Copy Start keyONTransfer chargingassemblySeparation chargingassemblyBlanking exposureLED lampScannerPrimary chargingassemblyScanning lamp (LA1)Main motor (M1)INTR AER SCFW2ReverseSCFW1SCRV1 LSTR STBYSSCRV2SCDPPre-transfer chargingassemblyRight deck/cassettepick-up clutch (CL14) ForwardCHAPTER 2 BASIC OPERATION2-8 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV.0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
