11. Removing the Feeding Roller1) Remove the feeding roller/sepa-ration belt assembly.2) Remove the stop ring q and thebushing w at the front.3) Remove the stop ring e, gear r,and bushing t at the rear.4) Remove the roller y from the feed-ing roller assembly.12. Removing the Separation BeltAssembly1) Remove the feeding roller/sepa-ration belt assembly.2) Remove the stop ring q and thebushing w at the front.3) Lift the front of the separation beltassembly, and shift it to the rear;then, remove the separation beltassembly.4) Detach the belt from the separationbelt assembly.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-103COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-889qwFigure 5-890ertyFigure 5-891qw
