10. Removing the Feeding Roller/SeparationBelt Assembly1) Slide the holding tray assembly tothe front.2) Remove the holding tray inletassembly.3) Remove the mounting screw q.4) While opening the left cover w,remove the feeding roller/separationbelt assembly e.CHAPTER 5 PICK-UP/FEEDING SYSTEM5-102 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 5-888weFigure 5-887q