33. Pick-up fails. (deck pick-up; front paper deck + cassette)CHAPTER 11 TROUBLESHOOTING11-99COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CauseUpper rightdoor,Lower rightdoorLifterPick-up rollerBeltDrive belt,Gear, CouplingDC controllerPCB outputDeck pick-upclutch (CL14,right deck;CL16, left deck)ChecksAre the upper right door and thelower right door closed securely?Slide out the deck from themachine. Does the lifter movedown? Set the deck. Is the soundof the lifter moving up heard?Does the pick-up roller rotate?Is the belt used to transmit drive tothe pick-up roller attached cor-rectly?Is the drive from the pick-up motortransmitted to the pick-up assem-bly through the drive belt, gear,and coupling?Set the meter to the 30VDCrange. Does the voltage betweenJ116-A2/J121-A5 and GNDchange from 24 to 0 V when theCopy Start key is pressed?Step123456YES/NONONOYESNONONOYESActionClose the door securely.See “The lifter fails tomove up.”If the roller is soiled,clean it with alcohol. Ifdeformation by wear isnoted, replace it.Attach the belt correctly.Check the drive belt,gear, and coupling.Replace the DCcontroller PCB.Check the wiring up tothe clutch; if normal,replace the clutch.
