4. Removing the Control PanelController (CPU) PCB1) Remove the five mounting screwsq; then, remove the control panelright support plate w and the controlpanel controller (CPU) PCB e.2) Remove the 13 mounting screws r,and remove the numeric keypad t.CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-25COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Figure 7-427rtFigure 7-426qqwe
