D. Pick-Up/Feeding System1. Orientation of the Cassette/Front Paper Deck Pick-Up RollerInstall the pick-up roller by reversing the steps used to remove it with the following inmind:• The pick-up roller at the front and the one at the rear are not interchangeable.• The collar of the pick-up roller at the front is gold.When installing the pick-up roller q to the pick-up assembly, make sure that theround marking w on the side of the roller and the round marking e on the collar(gold) face the front of the copier.Figure 11-225• The collar of the pick-up roller at the rear is silver. When installing the pick-up rollerr to the pick-up roller, make sure that the round marking t on the collar (silver)faces the rear.Figure 11-225artDirection ofrotationCollar (silver) RearqeDirection ofrotationCollar (gold) FrontwCHAPTER 11 TROUBLESHOOTING11-23COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
