7. Adjusting the Deck SeparationRoller PressureIf double feeding or separationfailure occurs when pick-up is from theside paper deck, adjust the position ofthe pressure spring of the deckseparation roller• If pick-up failure occurs, move thespring in the direction of arrow A.• If double feeding occurs, move thespring in the direction of arrow B.8. Positioning the Deck Pick-UpRoller Releasing Solenoid(SL101)Before removing the deck pick-uproller releasing solenoid q from thesupport plate, try to remember theposition of the two fixing screws w onthe solenoid with reference to the scaleon the support plate; or, mark theposition on the support plate to identifythe position of the solenoid.Be sure to fix the solenoid in itsinitial position whenever installing it onits own.CHAPTER 8 PAPER DECK-A18-44 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)ABFigure 8-457qwFigure 8-458
