6. Executing AE Automatic Adjustment1) Open the front door, and insert the door switch actuator into the door switch actuator.2) Push the service mode switch over the cover.3) Select the following in service mode:AE_ADJ:0 ← (]: START)(0: F5, 1:F9).4) Place the Test Sheet on the copyboard, and close the copyboard cover.Figure 11-2075) Press the user mode key ] once.• The scanning lamp turns on, and auto adjustment is executed.AE_ADJ: 1 ← (]: START)Changes to ‘1’.6) Place a newspaper on the copyboard, and close the copyboard cover.7) Press the user mode key ] once.• The scanning lamp turns on, and automatic adjustment is executed.AE_ADJ: 0 ← (]: START)Changes to ‘0’.8) Press the Reset key twice to end service mode.NA-3Test SheetButted.CHAPTER 11 TROUBLESHOOTING11-9COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
