13. Adjusting the Position of the Holding Tray Paper Deflecting Plate DriveSolenoidInstall the solenoid so that its stroke (end-to-end distance between rubber silencerand solenoid) is 5.0 ±0.3 mm.Figure 11-23714. Adjusting the Position of the Holding Tray Assembly Side Guide PlateMark the position of the side guide plate with a pencil in advance, and install it withreference to the marking.Figure 11-2385.0±0.3mmCHAPTER 11 TROUBLESHOOTING11-33COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
