Toshiba GR-200-5 Instruction Manual

Also see for GR 200 Series: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6F2T0207 (0.01)GRE200 (5,6)- 832 -10.2.30 Supervision of response for pinging (Ping error)LAN communication error† is detected by pinging for the addresses instructed.†Note:see ChapterCommunication Protocol: LAN operation (→p. 865), or ChapterTechnical description: Signal processing and communication module (→p. 645).(i) Error levelError level has been set at level 3 (Minor error; default), but the user can change it withprogram the level using settings [CHK_PING*:LVl]. Remember that the user needs to set Onfor settings [CHK_PING*:Sw]. The manufacturer has set 100 sec. to detect a failure. The errorwill be reset in 20 seconds when the error is resolved.(ii) Error messageWhen detecting an error, the error message will be shown on LCD screen. LED will be lit up.Table 10.2-59 Error messages provided by the supervisor in CHK_PINGMessage and level Meaning of the informationLAN* (ping) errorDetection of the pinging failure instructed with “LAN*” asfollows:LAN1 (ping): Communication module (Port1 at C1)LAN2 (ping): Communication module (Port2 at C2)Error level Minor error (Level 3)Table 10.2-60 Detailed information in Hexadecimal in CHK_PINGDisplayareaMeaning of the detailed informationLeft column Right columnToprow Destination address for pinging (No information is displayed)Middlerow (No information is displayed) (No information is displayed)Bottomrow (No information is displayed) (No information is displayed)