Toshiba GR-200-5 Instruction Manual

Also see for GR 200 Series: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6F2T0207 (0.01)GRE200 (5,6)- 493 -Input OutputSelection logic in DPOS01Command “Local-On-Control”DPOS01-CloseILK† condition (“ON”) passed[DPOS01-CTRAHMI]SBODPOS01 function (Function ID: 512001)SBODIR&&1≥ &0.1s0 t0.6s0 tEither “SBO mode” or “DIR mode”(e.g., “ctlmodel” in IEC61850*)Select condition‡“DPOS01_OSL_BO_CSF”(512001_8603011DC6)Select “Failed”To BO connectionSelect “success”To “Wait for a command”Select commandwith ILK† conditionOperate commandwith ILK† conditionFor SBO operationFor DIR operationTo “Wait for a nextcommand”Figure 4.2-6 Select ‘On’ on the front panel in DPOS01†††Note:The ILK function provides the operation criterion for “On”.‡Note:A “select condition” signal is provided from the select condition scheme. For moreinformation, see Figure 4.2-13.††Note: To identify the output signals of the other DPOS logics, see Table 4.2-8.