Toshiba GR-200-5 Instruction Manual

Also see for GR 200 Series: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6F2T0207 (0.01)GRE200 (5,6)- 1012 -(ii) Binary inputAll binary input circuits (BIs) are user-configurable; the user can set common programmablelogic (CPL) for each binary input circuit. (For more information of CPL, see ChapterTechnicaldescription: Binary IO module: Binary input circuit →p. 657)The user can activate or turn off the above timers and switches using the setting function.To configure the binary input circuits, the user should follow the procedure in steps ((ii)-1 and(ii)-2)Selection of binary input circuit: Figure 12.6-4 illustrates the selection of abinary input circuit on a BIO module. Move the cursor by pressing ▲ and ▼.Then, press ►to go to the next hierarchy.Figure 12.6-4 Selection of slot and binary input circuit (Sample)CPL setting: Figure 12.6-5 is “Common” setting. The user can set a thresholdlevel and the number of comparisons feature for contact chatter for all binaryinput circuits.Figure 12.6-5 Common screen (Sample)Figure 12.6-6 shows the CPL setting for binary input circuit (BI1). The timer andthe inverse switch can be activated when On is set for setting [BI1_CPL]. PressENTER to complete the setting of a switch or parameter.Binary Input10:48 2/3Slot#1 >_Slot#3 >Slot#4 > [►]Slot#310:48 1/8_Common >BI1 >BI2 >BI3 >BI4 >BI5 >Common10:48 1/2Thres_Level +LowCmp_Num +4