Toshiba GR-200-5 Instruction Manual

Also see for GR 200 Series: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6F2T0207 (0.01)GRE200 (5,6)- 826 -10.2.25 Supervision of data in PLC function (PLC data error)Error in the PLC function is detected because the data coded by PLC editor1 has an error.(i) Error levelThe error level has been set at level 3 (Minor error; default), but the user can change it withsetting [CHK_PLC_DAT:LVl]. Remember that the user needs to set On for setting[CHK_PLC_DAT:Sw]. Detection time (120 sec) is given for the supervisor function to to detecta failure. The error will be reset within 60 seconds if the failure is solved.(ii) Error messageWhen detecting an error, the error message will be shown on the LCD screen. LED will be litup.Table 10.2-49 Error messages provided by the supervisor in CHK_PLC_DATMessage and level Meaning of the informationPLC data error Detection of the failure in the PLC functionError level Minor error (Level 3)1For more information about the task and its kind, seeBasic manual: Programmable LogicController and PLC editor (6F2S1904) separately.