Toshiba GR-200-5 Instruction Manual

Also see for GR 200 Series: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6F2T0207 (0.01)GRE200 (5,6)- 999 -Figure 12.5-3 Switch Setting Mode displayTo begin the setting process, press ENTER. Once the setting is changed, the [*]mark will appear alongside the name of the setting. When the change is canceledor confirmed, the [*] mark will disappear automatically. Figure 12.5-4 shows theoperation of the switch setting mode.Figure 12.5-4 Operation of Switch Setting ModeNote: the practical meanings are beyond the scope of this section. The above figure isprovided by way of example. The user should confirm setting values after makingany changes to their values. For verification, refer to “Confirmation of Setting”discussed later.List Selection Mode: it is composed of main-setting-screens and selection-list-screens, as shown in Figure 12.5-5. In the main, the setting name and selecteditem are displayed. Press ENTER to begin the setting process; the screen forselection list will appear. Once a setting has been changed, the [*] mark willappear alongside the name of the setting. When the change is canceled orOC110:48 24/56_OC1-VTFBlk +NonOC1-UseFor +TripOC1-OPMD +3PORBefore Changing Setting After ChangingOC110:48 24/56*OC1-VTFBlk +BlockOC1-UseFor +TripOC1-OPMD +3POROC110:48 24/56_OC1-VTFBlk +NonOC1-UseFor +TripOC1-OPMD +3POROC110:48 24/56OC1-VTFBlk +NonOC1-UseFor +TripOC1-OPMD +3POROC110:48 24/56*OC1-VTFBlk +BlockOC1-UseFor +TripOC1-OPMD +3POR[ENTER][►] / [▼] /[▲] / [◄][CANCEL][ENTER][CANCEL]OC110:48 24/56*OC1-2fBlk +BlockOC1-UseFor +TripOC1-OPMD +3POR[►] / [▼] /[▲] / [◄][ENTER][▼][▲]OC110:48 24/56*OC1-2fBlk +Block_OC1-UseFor +TripOC1-OPMD +3POR