CHAPTER 8 PAPER DECK-A18-36 COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)4) Remove the front cover of the deck.(See p. 8-20.)5) Remove the four screws e, andremove the roll support plate r.6) Remove the coupling shaft t andthe E-ring y; then, remove thepulley cover u.7) Remove the two screws i and thecable fixing plate o; then, removethe lifter cable !0 on the outside.8) Remove the two screws !1 and thecable fixing plate !2; then, removethe lifter cable !3 on the inside.• To detach the lifter cable !3 on theinside from the pulley !4 on theinside, remove the two set screws!6 on the pulley !5 on the outside,and remove the pulley in advance.ertyui o !2 !1!0 !3!6!4 !5Figure 8-407Figure 8-408
