CHAPTER 8 PAPER DECK-A18-35COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)3) Remove the compartment from thedeck. (See p. 8-28.)4) Disconnect the two connectors t,and remove the five screws y; then,remove the deck lifter motor unit u.5. Removing the Lifter Cable (deckfront)1) Open the compartment of the deck;remove all copy paper, if any.2) Remove the screw, and remove thetrailing edge guide plate from insidethe compartment.3) Push the sensor lever q of thepaper supply sensor inside thecompartment with a finger to lowerthe lifter until the holes (left-right) inthe compartment side plate and theholes (left/right) in the lifter match;then, insert two screwdrivers (toposition the lifter).tyyuFigure 8-405qwFigure 8-406
